Neuspeed 25.02.25.3 User Manual download pdf

NEUSPEED • 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX

Visit us on the web…http://www.neuspeed.com

25mm TUBULAR REAR ANTI-ROLL BAR

FITS: 2006-up AUDI A3(8P) FWD, 2008-09 AUDI TT(8J) FWD

2005-up VOLKSWAGEN GTI, GLI, SPORTWAGEN MKV/VI, Jetta V

2006-up Passat(B6) FWD, 2007-09 Rabbit

2009-up CC FWD, 2010-up Golf VI & 2011-12 Tiguan FWD

PART # 25.02.25.3

INSTALLATION INSTRUCTIONS

PARTS LIST: 1 – TUBULAR ANTI-ROLL BAR 1 – SILICONE GREASE

2 – POLYURETHANE BUSHINGS

TOOLS REQUIRED: 1 – RATCHET WRENCH

1 – M10 TRIPLE SQUARE (12 POINT) OR 8mm HEX KEY WRENCH

1 – M6 TRIPLE SQUARE (12 POINT) OR 5mm HEX KEY WRENCH

1 – 16mm WRENCH

1. Park car on a flat, level surface capable of supporting the vehicle’s weight on jack and

jack stands. Using the manufacturer’s recommended lifting point(s), raise rear of vehicle

and support with jack stands. NEVER WORK ON A VEHICLE SUPPORTED ONLY WITH

A JACK!

2. Disconnect end-links from original anti-

roll bar by securing stud with M6 Triple

Square or 5mm hex key wrench and

loosening nut with 16mm wrench.

3. Remove four bushing clamp mounting

bolts using a M10 Triple Square or 8mm hex

key wrench and remove original anti-roll bar

from vehicle.

4. Apply silicone grease to the inside of

supplied bushings and install on the inside

of stop washer on NEUSPE ED anti-roll bar.

5. Install NEUSPEED anti-roll bar using

original clamps and bolts to sub-frame.

Torque bolts to 20Nm (15 ft-lbs).

1 2

Page 1

NEUSPEED • 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX Visit us on the web…http://www.neuspeed.com 25mm TUBULAR REAR

Page 2

NEUSPEED • 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX Visit us on the web…http://www.neuspeed.com 6. Attach end-l

No comments

Neuspeed 25.02.25.3 User Manual