Neuspeed 62.02.68 User Manual download pdf

NEUSPEED • 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX

www.neuspeed.com

POWER PULLEY KIT

2008.5-12 AUDI A4(B8), A5 and Q5(8R) 2.0L TFSI

With Hydraulic Power Steering Pump

PART # 62.02.68

INSTALLATION INSTRUCTIONS

PART LIST: 1 – CRANKSHAFT PULLEY 1 – BELT

1 – CRANKSHAFT BOLT

TOOLS REQUIRED: 1 – 17mm Wrench 1 – Ratchet Wrench

1 – 7mm Socket 1 – VW Tool T10355 Counter Holder

1 – Phillips screwdriver 1 – Torque Wrench

1 – 24mm Socket 1 – Long Handle Breaker Bar

1 – Mirror

NOTE: FACTORY TOOL REQUIRED AND PROFESSIONAL INSTALLATION RECOMMENDED.

1. Car Hoist required, vehicle not high enough from

ground with a jack or jack stands.

2. Remove lower engine splash guard. Undo the

dowel pins using a Phillips screwdriver. A4

shown, models may vary.

3. Using 7mm socket unbolt and remove electric

fan control module.

4. Disconnect electrical connectors at both electric

fans; pull harness out of retaining groove at let

hang.

5. Before removing ribbed belt, mark running

direction with marking pen if the stock belt and

pulley is ever to be re-installed.

6. Using a 17mm wrench, rotate spring loaded idler

pulley downwards to release tension and remove

ribbed belt. Now slowly release belt tensioner.

1 2

NEUSPEED • 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX www.neuspeed.com POWER PULLEY KIT 2008.5-12 AUDI A4(B8), A5 an

NEUSPEED • 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX www.neuspeed.com 7. Using the 24mm socket on crankshaf

No comments

Neuspeed 62.02.68 User Manual